WL8200-X10 Indoor 802.11ax Wi-Fi 6 Triple Band Enterprise AP

WL8200-X10 Indoor 802.11ax Wi-Fi 6 Triple Band Enterprise AP

Short Description:

WL8200-X10 is a next generation Wi-Fi 6 high-performance enterprise Wi-Fi AP (Access Point) released by DCN, it can support 802.11ax and provide 2.5G Ethernet uplink connectivity. With high performance 6.82Gbps access bandwidth, WL8200-X10 is expected to have high density client connectivity to deliver better Wi-Fi user experience. With industry-leading triple band 14 spatial streams, WL8200-X10 is ideal choice for high-density and high-bandwidth access scenarios such as AR/VR application, 4K...


Product Detail

Product Tags

WL8200-X10 is a next generation Wi-Fi 6 high-performance enterprise Wi-Fi AP (Access Point) released by DCN, it can support 802.11ax and provide 2.5G Ethernet uplink connectivity. With high performance 6.82Gbps access bandwidth, WL8200-X10 is expected to have high density client connectivity to deliver better Wi-Fi user experience. With industry-leading triple band 14 spatial streams, WL8200-X10 is ideal choice for high-density and high-bandwidth access scenarios such as AR/VR application, 4K/8K HD video streaming, libraries, lecture halls, convention centers, etc.

微信截图_20201109162851

Highlights

Industry-leading innovative design of tri-band, 14 spatial streams

Traditional wireless APs usually use 2.4GHz and 5GHz dual-band solutions. The WL8200-X10 product innovatively adopts a tri-band design. The whole AP supports 3 radio frequency modules to work at the same time, with an access rate of up to 6.82Gbps, and one radio frequency is fixed for 2.4G working mode, the other two radios are in 5G working mode. Adopt the latest MU-MIMO technology (multi-user input and output), OFDMA technology (orthogonal frequency division multiple access), spatial multiplexing technology, TWT technology (target wake-up time) and other advanced wireless technologies, the data transmission breaks through the traditional wireless network serial communication mechanism. The utilization rate of wireless spectrum resources has been doubled, and the number of effective access users has been greatly increased, effectively reducing the deployment cost of wireless network and increasing the user experience in high density scene.

Flexible installation

WL8200-X10 supports wall mounting, ceiling mounting, T-keel mounting, desktop mounting, you can deploy it almost everywhere that you want.

Triple band total 6.82Gbps for high density scene

WL8200-X10 support tri-band, accessing bandwidth can reach to 6.82Gbps, it could connect much more clients simultaneously, improve the overall throughput of the WIFI network greatly.

Dual mode fit & fat

WL8200-X10 can work in fit or fat mode and can flexibly switch between the fit mode and the fat mode according to network planning requirements.

Anti-thief

WL8200-X10 can work with Kensington technology to protect the investment of customer, which is very important to the specific customer.

Flexible power input

The power input of WL8200-X10 can be standard PoE or DC adapter, customer can make choice accordingly.

 

Product Specifications

Hardware Specifications

Item WL8200-X10
Dimensions (L*W*H) (mm) 215 x 215 x 45
Physical port 2 x 10/100/1000/2500Mbps ethernet ports1 x BLE module
Console port (RJ-45) 1
USB 2.0 port 1
Power supply 802.3bt PoE and External power adapter(Input: 100~240V AC , Output: 12 V DC)
Maximum power consumption <30W
RF port Built-in 2.4 GHz 4 dBi antenna and 5 GHz 5 dBi antenna
Working frequency band 802.11b/g/n/ax: 2.4 GHz to 2.483 GHz

802.11a/n/ac/ac wave 2/ax:

5.150GHz to 5.250GHz

5.250GHz to 5.350GHz

5.725GHz to 5.850GHz

Modulation technology
11b:DSS: CCK@5.5/11Mbps, DQPSK@2Mbps, DBPSK@1Mbps11a/g:OFDM:64QAM@48/54Mbps,16QAM@24Mbps, QPSK@12/18Mbps, BPSK@6/9Mbps11n:MIMO-OFDM: BPSK, QPSK,16QAM,64QAM11ac:MIMO-OFDM: BPSK, QPSK,16QAM,64QAM,256QAM11ax: MIMO-OFDM: BPSK,QPSK,16QAM,64QAM,256QAM,1024QAM802.11b:BPSK,QPSK,CCK802.11a/g/n:BPSK,QPSK,16-QAM,64-QAM802.11ac:BPSK,QPSK,16-QAM,64-QAM,256-QAM
Transmit power 2.4G:23dBm(Per Chain)5G:23dBm(Per Chain)(Notefinal output power comply to deployment regulation might be different in different countries)

Power adjustment granularity

1 dBm
Working/Storage temperature 0°C to +50°C–40°C to +70°C
Working/Storage RH 5% to 95% (non-condensing)
Protection level IP41

 

Software Specifications

Item Feature WL8200-X10

WLAN

Product positioning Indoor tri-band Wi-Fi6 AP
Working frequency band 1st band: 2.4 GHz, 4*4MIMO2nd band: 5GHz, 8*8MIMO

3rd band: 5GHz, 2*2MIMO

Bandwidth performance Total 6.82Gbps1st band: 2.4 GHz, 1.15Gbps

2nd band: 5GHz, 4.8Gbps

3rd band: 5GHz, 867Mbps

Virtual AP (BSSID) 48
Concurrent user 400+
Number of spatial streams 1st band: 2.4 GHz, 4 spatial streams2nd band: 5GHz, 8 spatial streams

3rd band: 5GHz, 2 spatial streams

Dynamic channel adjustment (DCA) Yes
Transmit power control (TPC) Yes
Blind area detection and repair Yes
SSID hiding Yes
RTS/CTS Yes
RF environment scanning Yes
Hybrid access Yes
Restriction on the number of access users Yes
Link integrity check Yes
Accessing control of terminals based on  signal strength Yes
Forcing terminals to roam based on signal strength Yes
Intelligent control of terminals based on airtime fairness Yes
High-density application optimization Yes

802.11ax

Space streams 2.4GHz:4, 5GHz:8
Frequency band 2.4GHz + 5GHz
80 MHz bundling Yes
Frame aggregation (A-MPDU) Yes
Frame aggregation (A-MSDU) Yes
Maximum likelihood demodulation (MLD) Yes
Transmit beamforming (TxBF) Yes
Maximum ratio combining (MRC) Yes
Space-time block coding (STBC) Yes
Low-density parity-check code (LDPC) Yes

Security

Encryption 64/128 WEP, TKIP, and CCMP encryption
802.11i Yes
Portal authentication Yes
WAPI Yes
MAC address authentication Yes
LDAP authentication Yes
PEAP authentication Yes
WIDS/WIPS Yes
Protection against DoS attacks Anti-DoS for wireless management packets
Forwarding security Frame filtering, white list, static blacklist, and dynamic blacklist
User isolation

AP L2 forwarding suppression

isolation between client

Periodic SSID enabling and disabling

Yes

Access control of free resources Yes
Wireless SAVI Yes
ACL Access control of various data packets such as MAC, IPv4, and IPv6 packets
Secure access control of APs Secure access control of APs, such as MAC authentication, password authentication, or digital certificate authentication between an AP and an AC
802.11W Yes, encryption of management frames

Forwarding

IP address setting Static IP address configuration or dynamic DHCP address allocation
IPv6 forwarding Yes
IPv6 portal Yes
Local forwarding Yes
Multicast IGMP snooping
Roaming Yes
AP switching reference

Signal strength, bit error rate, RSSI, S/N, whether neighboring APs are normally operating, etc.

WDS

Yes

QoS

WMM

Yes

Priority mapping

Ethernet port 802.1P identification and marking

Mapping from wireless priorities to wired priorities

QoS policy mapping

Mapping of different SSIDs/VLANs to different QoS policies

Mapping of data streams that match with different packet fields to different QoS policies

L2-L4 packet filtering and flow classification

Yes: MAC, IPv4, and IPv6 packets

Load balancing

Load balancing based on the number of users

Load balancing based on user traffic

Load balancing based on frequency bands

Bandwidth limit

Bandwidth limit based on APs

Bandwidth limit based on SSIDs

Bandwidth limit based on terminals

Bandwidth limit based on specific data streams

Call admission control (CAC)

CAC based on the number of users

Power saving mode

Yes

Automatic emergency mechanism of APs Yes
Intelligent identification of terminals Yes
Multicast enhancement Multicast to unicast

Management

Network management Centralized management through an AC; both fit and fat modes
Maintenance mode Both local and remote maintenance
Log function Local logs, Syslog, and log file export
Alarm Yes
Fault detection Yes
Statistics Yes
Switching between the fat and fit modes An AP working in fit mode can switch to the fat mode through a wireless AC;An AP working in fat mode can switch to the fit mode through a local control port or Telnet.
Remote probe analysis Yes
Watchdog Yes
Value added service Value added marketing Support: various apps based on intelligent terminals, advertising push based on location, personalized push of portals
Value added authentication WeChat, SMS, QR code
Passenger flow analysis yes

 

Typical Application

 微信截图_20201109162905

 

Order Information

Product Description
WL8200-X10

DCN new generation Wi-Fi6 indoor AP, tri-band and total 14 spatial streams, 802.11a/b/g/n/ac/ax supported (2.4GHz 4*4, first 5GHz 8*8 and second 5GHz 2*2), fat/fit, default no power adapter, could be managed by DCN AP controller.

  • Leave Your Message

    Write your message here and send it to us

    Related Products

    Leave Your Message

    Write your message here and send it to us